Installing a hatch...
My Cal 20's hatch over the V-berth was sealed up by a previous owner, and I would like to install a new hatch so I can do some overnights on the boat. As it is, a little more air would be needed to spend any length of time below. Any advice on installing a hatch? I have never done one before.
It is a pretty simple process if you are reasonably handy. It may be complicated by what your previous owner did but it is hard to comment on that without pictures. Here's a good description of the process.
Installing Hatches and Deck Plates by Don Casey
|All times are GMT -4. The time now is 09:01 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012