The concave recess isn't all that critical if you've countersunk each of the fastener holes slightly.
Well Halekai...as usual, you present a very convincing case based on experience. I've had good luck re-bedding MT genny tracks with the 2-step method...perhaps due to overkill on the 4200...perhaps luck...
Will give your way a shot the next time around...but I don't recall concavity on the bottom of my track so will have to check that first as it seems critical.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.