
04-20-2008
|
 |
Senior Member
|
|
Join Date: Jan 2008
Location: Elliott Bay Marina, J 28 Seattle, WA
Posts: 3,150
Rep Power: 8
|
|
You probably had it in the wrong display mode as the Furno has Head-Up, Course-Up, True Motion and North-Up modes, where you in head-up mode?. OR: see this:LINK
and just in case it doesn't still:
Question
My radar is showing targets in the wrong place (i.e. the buoy in front of the boat is showing on the radar as a target behind the boat). My compass heading input is correct and the radar is in head-up mode. How do I correct this?
Answer
All radars require a heading alignment upon installation of the radar antenna. Refer to your installation manual for the proper procedure in completing this adjustment. Once you complete the heading alignment the targets should show in the correct places.
source is from their tech support site - narrow down to radar and then display as keyword.
__________________
-- Jody
S/V " To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. " - 1983, Barberis Show 38! or To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Last edited by artbyjody; 04-20-2008 at 11:00 PM.
|