Enviro friendly paint stripping system that works . . .
I tried it, I like it, but I need to figure out if it''s cost effective. I spent saturday experimentally stripping a 1979 Boston Whaler Outrage V20. Once I got the pressures and media feed figured out, it looks like it''s about a 3 hour job. It''d be a lot cheaper stateside. We did the bottom, topsides and decks. Took off rust from the transom, polished the prop, polished all the stainless where there was surface rust browning the rails. I researched this for two years before buying the equipment. Soda blasting. Amazing. Any questions, back channel firstname.lastname@example.org.
|All times are GMT -4. The time now is 10:04 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012