Californian version of Worthington horizontal cylinders
I'm hoping someone here could help me. I bought two 10lb alum. horizontal cylinders from WestMarine not knowing that they would be what someone explained to me as a Californian version, with two valves, the central valve only one way and the second (bigger) valve for filling. As I am out of the US I have very difficult time filling those.
Apparently I could either replace the central one way valve by the "normal" two way valve, which I could easily fill everywhere or I could get male part for the filling valve. Any experience with these cylinders? Probably getting the fitting for the filling valve would be much easier as I wouldn't have to mess with the main valve. But can I easily fill through the filling valve without other equipment?
I was trying to locate the fitting for the filling valve, but can't find it anywhere. Any suggestions?
|All times are GMT -4. The time now is 10:56 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012