Converting a settee/pilot berth to a dinette.
Ive got to tear out the port settee/pilot berth to rebuild a rotted bulkhead. Ive toyed with the idea of building a dinette in this area for along time. Ive got the general idea of how to go about building this, but im just not sure if i should or not. There seems to be plenty of space to build it. It is 6-1/2' between the bulkheads. I figure i can do the seats so they stick out 20'' each from the bulkheads. That leaves me 38'' wide for he table. I think this will be plenty of space.
Here is a picture of the area. This is before i built the pilot berth.
Funny. I just finished tearing out a dinette to put in a settee and a pilot berth. The grass is always greener.........
Well im putting a pilot berth on the other side behind that settee. Ive also got a nice quarter berth. I just want a good solid table.
|All times are GMT -4. The time now is 08:54 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012