rash decision: applying gelcoat
Some time ago members of this group were kind enough to advise me on a rash of hard little blisters that appeared on my topsides.
And the boat wasn''t too good either....
I rubbed them down, but find that some of them have paid a return visit. From reading Tony Staton-Bevan''s book I think they''re hard little nibs that have arisen in the double gelcoat that Westerly used at that time on many boats. I''ve even found some of the little beasts on interior gelcoat.
My intention now is to rub the worst affected areas down to the laminate, dry it out over the winter and renew substantial bits of gelcoat.
Can I apply gelcoat with a roller or a brush? Is gelcoat the right stuff to use? Is my diagnosis and suggested treatment way off beam?
So many questions! Any help would be, as always, much appreciated.
All the best
|All times are GMT -4. The time now is 04:37 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012