SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Gear & Maintenance (http://www.sailnet.com/forums/gear-maintenance/)
-   -   Zinc Anode (http://www.sailnet.com/forums/gear-maintenance/52184-zinc-anode.html)

Kestrel303 03-06-2009 09:46 AM

Zinc Anode
 
I own a Pearson 303 and need a replacement prop nut zinc. The prop is two blade with a one inch shaft. Does any one know the proper size replacement?

RanAweigh 03-06-2009 09:54 AM

The thread on a 1" SAE shaft is 3/4-10 if you are looking for an "acorn" style zinc.
Check this site they may be available right here

Kestrel303 03-06-2009 10:09 AM

1 inch

sailingdog 03-06-2009 10:12 AM

Ranaweigh—

It's a one-inch shaft... says so in the OP... :)

Quote:

The prop is two blade with a one inch shaft.

RanAweigh 03-06-2009 10:19 AM

Yeah SD noticed it after my first response then edited it. Thanks for pointing out my dyslexia

Fstbttms 03-06-2009 12:18 PM

You want the "C" size prop nut nut zinc. It fits the nut on 1" & 1 1/8" shafts.

RanAweigh 03-06-2009 12:41 PM

Quote:

Originally Posted by Fstbttms (Post 458827)
You want the "C" size prop nut nut zinc. It fits the nut on 1" & 1 1/8" shafts.

That is correct IF you have a Camp zinc bracket that looks like this
http://store.hamiltonmarine.com/prodimg/HMZ-P-CN.JPG

Kestrel303 03-06-2009 05:16 PM

You guys are GREAT. It is a Camp. I just found the "C" stamp. Thanks.

lbdavis 03-06-2009 05:39 PM

Welcome to Sailnet, Kestrel303!

Great to have fellow P303'ers on board! What year and where do you sail her? If I can be so bold.

Kestrel303 03-06-2009 06:01 PM

Hull #212 from 1985. I've been sailing the LI Sound. You?


All times are GMT -4. The time now is 12:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012