Zinc Anode

Kestrel303 · #1 (**permalink**) 03-06-2009

I own a Pearson 303 and need a replacement prop nut zinc. The prop is two blade with a one inch shaft. Does any one know the proper size replacement?

RanAweigh · #2 (**permalink**) 03-06-2009

The thread on a 1" SAE shaft is 3/4-10 if you are looking for an "acorn" style zinc.
Check this site they may be available right here

Kestrel303 · #3 (**permalink**) 03-06-2009

1 inch

sailingdog · #4 (**permalink**) 03-06-2009

Ranaweigh—

It's a one-inch shaft... says so in the OP...

Quote:

The prop is two blade with a one inch shaft.

RanAweigh · #5 (**permalink**) 03-06-2009

Yeah SD noticed it after my first response then edited it. Thanks for pointing out my dyslexia

Fstbttms · #6 (**permalink**) 03-06-2009

You want the "C" size prop nut nut zinc. It fits the nut on 1" & 1 1/8" shafts.

RanAweigh · #7 (**permalink**) 03-06-2009

Quote:

Originally Posted by Fstbttms

You want the "C" size prop nut nut zinc. It fits the nut on 1" & 1 1/8" shafts.

That is correct IF you have a Camp zinc bracket that looks like this

Kestrel303 · #8 (**permalink**) 03-06-2009

You guys are GREAT. It is a Camp. I just found the "C" stamp. Thanks.

lbdavis · #9 (**permalink**) 03-06-2009

Welcome to Sailnet, Kestrel303!

Great to have fellow P303'ers on board! What year and where do you sail her? If I can be so bold.

Kestrel303 · #10 (**permalink**) 03-06-2009

Hull #212 from 1985. I've been sailing the LI Sound. You?