I have a Heritage 35 which has a ferryman s30 22hp diesel engine driving a hydraulic pump and motor. At the present time I have a 2 bladed prop 16 x 10 LH. The prop seems to work ok at 2200 rpm constant and I can get 6.5 knots however going into a strong wind / waves lose a lot of the power and slow down considerably. Are ther any recommendations for a fixed 3 bladed prop???
In addition am going to the salt water next year for an extented time. Presently have vc tar with a pettit hard bottom paint and would like to put on the petitt trinidad sr,
any problems here, do I have to take off the vc tar
thankyou for your help
Try http://220.127.116.11/myweb/ This link is a discussion area for Baumann Propeller in Houston. Most knowledgeable folks!
|All times are GMT -4. The time now is 04:24 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012