What to do with water stains
Afer "nearly" finishing some work on my boat several weekends ago, I packed up and left one of the seacocks open. Of course this was the one going to the plumping I had just worked on. Several days later, I received a very unwelcome call from my friendly marina operator, informing me that my boat was sinking and they could not access the interior of the boat. I immediately went and corrected the 3 problems. (water pumped out, stopcocks closed, and now the marina has access to my boat).
Fortunately, the vessel did not get water in the engine, but it did leave a nasty water mark on the interior bulk heads. I have scrubbed off the stain (litterally) and now have a visible reminder of my ignorace. I have never stained the interior of the boat and only used a lemon oil on the teak to keep it looking good.
Does anyone have any ideas on how best to correct this sight?
|All times are GMT -4. The time now is 09:25 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012