Tanzer 16 Measurements?

[ashbysmith]

I am restoring a Tanzer 16 which has sagged on a boat trailer with poor hull support on port and starboard.

What is the correct measurement from the top of the coaming (lay a straight stick across the cockpit coaming above the aft end of the teak centerboard cap) to the floor of the boat (besided the keelson). This should be measured vertically at the aft end of the teak cap on the centerboard case.

I have new bunks on the trailer with which I can hopefully push up the sides of the hull to the correct height as measured above.

Thanks.

[rikhall]

There is a very active Tanzer 16 association.

Tanzer 16 organization

Rik