deck refreshing...need advice, tips?
my boat has been sitting in a barn 15 years, the hull is fiberglass and in good condition, the deck is plywood, the paint is cracked and dry.
hears what I wanted to do, sand then apply a coat of diluted epoxy, I want to dilut the epoxy so it penetrats the wood.
next a few coats of paint.
is this an ok procedure for restoring old wood?
Here's West's opinion of thinning epoxy as well as a better solution:
Thanks Brian after reading the link you have provide, I realise epoxy is overkill, my deck only needs a fresh paint job. I do have some rotten wood down below, but they are easy to change not worth salvaging.
|All times are GMT -4. The time now is 07:36 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012