Atomic 4 Studs

TerenceONeill · #1 (**permalink**) 04-05-2003

Hi there,
Can anyone point me in the right direction for putting the correct studs in the block for our atomic 4.
I had them in a nice little rack until I knocked it over.
My question should be easy enough, I just want to make sure that I am putting all the studs in the right place. Do the lifting eye studs go through the alternator bracket?
I tried to figure out how to post this to just the atomic 4 list, but I could not figure that out!
Thanks for the help.
Terry

RichH · #2 (**permalink**) 04-05-2003

The longest studs are for the thermostat housing, the next 2 shorter are for the lifting eye plate, + smaller 12(or 13).

BTW: Dont forget the aircraft grade permatex on the stud threads & stud hole threads; Locktite on loose studs, if needed.

TerenceONeill · #3 (**permalink**) 04-06-2003

Thanks Rich.
I''m off to install the new head.
Terry