Old CDI furler drum, have one? I need it!

[deniseO30]

It's called "Reefer" most production 30 ish foot, boats in the 80's used them CDI wants as much for new old style drum as a whole new CDI with plastic luff.

anyone? Please?

thanks!

[mdbee]

Find someone that needs the plastic "luff". I was thinking about replacing mine and called him too. Like you said, the "luff" wasn't much cheaper than a whole unit. I decided to try to straighten mine out. The previous owner didn't store it right with the mast down and it was "bent" in a few places.

I would split it with you but mine is looking better after laying flat in the Texas sun for a few months. I'll go check it again tomorrow.

Originally Posted by deniseO30

It's called "Reefer" most production 30 ish foot, boats in the 80's used them CDI wants as much for new old style drum as a whole new CDI with plastic luff.

anyone? Please?

thanks!

[knothead]

Originally Posted by deniseO30

It's called "Reefer" most production 30 ish foot, boats in the 80's used them CDI wants as much for new old style drum as a whole new CDI with plastic luff.

anyone? Please?

thanks!

Denise, CDI made a bunch of different models. And they changed over the years.
You will probably need to be specific about which one you have.



CDI - Reefer System Parts

[deniseO30]

I'll measure the drum, but it's pointless if no one has one. I've been trying for a couple of years now. Gad I hate being poor at this point in time.

CDI says
Replacement parts for the Reefer II shown below are no longer available.