- - Main Halyard Winch
||12-06-2010 08:12 PM
Main Halyard Winch
I have a Le Comte 38' NEII. It has a wire Main Halyard Winch. I'm going to replace it. The current winch is 4.5" in diameter (base) and has 6 threaded mounting screws in the pad spaced evenly 2" apart. Does anyone have any suggestions on what a good rope replacement would be? Thanks!
||12-06-2010 08:48 PM
I suspect you'll need to take a pattern of the old base and go do some winch browsing at your nearest suppliers (or on-line). You'll be very lucky to find a match.
||12-07-2010 12:17 AM
Faster is right. I doubt there is a winch with the exact spacing. Best to buy the winch that will do the job the best and then modify the mount to suit.
Personally I like Anderson winches - made about 400 miles from the Lecomte yard.:)
|All times are GMT -4. The time now is 01:00 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
User Alert System provided by
Advanced User Tagging v3.1.0 (Pro) -
vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012