||03-28-2011 10:20 AM
Removing lag screws corroded on strainer thruhull
After removing my strainer thruhull to rebed, found that instead of using 4 bolts and nuts to secure the strainer through the hull, lag screws were used. Now I have 4 screws(heads are corroded off) going completely through my hull. The tips of the screws are just breaking through the inside of the hull. Any easy way:laugher to remove these:laugher. Also could I use epoxy to fill the holes afterwards, or would i have to reglass.
||03-28-2011 03:34 PM
Maybe drill out the lag screws, then replace with through bolts?
|All times are GMT -4. The time now is 07:30 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012