I recently had a chainplate break on my 27 Ericson and was lucky enough to have the break visible just below the deck and was able to attach and bolt a brace between the two visible sections after grinding away the "old" s/s.
However what normally happens if the break is in the glassed part of the hull?? To grind it all out seems like an impossibe job!
|All times are GMT -4. The time now is 11:23 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012