Join Date: May 2012
Location: Mississippi Gulf Coast
Thanked 0 Times in 0 Posts
Rep Power: 0
Re: Rudder hardware for a Balboa 20
Steve, thanks for the quick reply.
My boat has a gudgeon with a matching separate pin on the upper transom and a solid mounted pintle on the lower transom. So, the rudder will need gudgeons on top and bottom. The lower rudder gudgeon will fit over the lower transom pintle and the upper rudder gudgeon will mate with the upper transom gudgeon via the separate pin.
The pins are 1/2" diameter bronze.
I took some pics but can't figure out how to post them.