Join Date: May 2004
Thanked 0 Times in 0 Posts
Rep Power: 0
Cal 33'''' running rig
Thanks for your quick reply Jeff. This is all quite new to me never re-stung any sized boat before. All the advice i can get is benifical and appricated. Though... i am not sure what this means -" if you are using a jib in a headfoil" . What is a headfoil. There are 3(jibs) on this boat. If i recall he(P.O) referd to them as a jib a genny 120(maybe a 130 not sure) and a genny 150 i think. All of them have little clips that you fasten to a centerd wire that runs to the top of the mast. ( uggh hope that is semi-clear....its Just like my old hobie cat)
Useing what i have gatherd here i belive this is what my order will look like.
a 100'' 3/8s ( not sure for what spin maybe) we will call it- Halyard 1
100'' 3/8s -h2 ( not sure what this runs either)
a 100'' 1/2'' -h3 ( goes to the bow of the boat maybe it is to lift the Spinker not really sure bout this either)
a 50'' 1/2-h4 ( used as a half wire half rope halyard on the Jib)
And the fully wire mainsail halyard -h5
does that look like it will work?