SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Gear & Maintenance (http://www.sailnet.com/forums/gear-maintenance/)
-   -   Help Identify Deck Plate / Inspection Port (http://www.sailnet.com/forums/gear-maintenance/97722-help-identify-deck-plate-inspection-port.html)

aloneinthewoods 03-20-2013 09:57 AM

Help Identify Deck Plate / Inspection Port
 
1 Attachment(s)
I would like some help identifing a deterioratind deck plate. I would like to pop in a replacement without making an epoxy project out of it. So far I have not been able to find one. The ID is 5.25ʺ and the diameter at the screws is 6.1ʺ. Can anyone identify this?
Attachment 13658

SchockT 03-20-2013 08:09 PM

Re: Help Identify Deck Plate / Inspection Port
 
Are you hoping to find a new cap that fits the old ring, or replace the whole thing?

They come in pretty standard sizes, just measure it, and look for the closest match. Worst case, you might have to get the next size up, and cut the hole to fit the new deck plate. There shouldn't be any epoxy jobs needed.

There are a few to choose HERE to start with!

Google is your friend! ;)

aloneinthewoods 03-25-2013 03:52 PM

Re: Help Identify Deck Plate / Inspection Port
 
I was hoping to replace it without drilling, cutting, or filling. This does not appear to be an option.

SloopJonB 03-25-2013 05:06 PM

Re: Help Identify Deck Plate / Inspection Port
 
On boats it never is. :)


All times are GMT -4. The time now is 05:25 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012