Rhodes 19 underdeck Cockpit issues
I have a 1966 Rhodes 19 with rotted wood that surrounds the cockpit under the deck. This wood is used to mount the 3 pieces of brightwork (port, starboard and aft) and seats in a channel of fiberglass.
After removing all 20-28 pieces, I was able to salvage some good ones and they are 5-6 inches long, 1 inch wide and cut on bias.
I could try to make these myself, but I was wondering if they could be sourced somewhere, what the best wood to use would be and what would be the best install method.
Final question: Do templates exist for the Rhodes 19 underdeck plywood brackets that mount on the hull and under the deck?
Thanks in advance for any help!
I'd check with a Rhodes 19 user group. They'll have much more knowledge that is specific to the boat, especially about repairs, and sources for parts.
All things Rhodes 19 related start and end at www.rhodes19.org.
|All times are GMT -4. The time now is 01:11 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012