Join Date: Aug 2008
Thanked 48 Times in 44 Posts
Rep Power: 8
Solar charger setting
I currently have my solar controller set to hold absorption for 1 hour at 14.6V. I wonder if there would any danger or plus/minus to just set it to 14.4V till it either can not hold due to the sun or till amps get to 0.5% capacity.
These are 6V wet cell so there is a con of needing to check the water level more often. But I bet after a while I learn how often they are going to need water (currently they need water about every 3 months).
Don't blow air up my rear, be useful and blow it at the sails!
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.