Join Date: Mar 2006
Location: New England
Thanked 16 Times in 13 Posts
Rep Power: 14
I do hope that they're bronze, not brass. Brass isn't a very good material for use on sailboats, as it tends to dezincify and then becomes very weak...rather quickly.
I don't know what to recommend for the exterior framing as I don't know what the boat or the ports look like... however, I can make a suggestion that you use a "wick" on the forward port to drain off the water that gathers in it. It is essentially a piece of cloth that overlaps the bottom of the port and hangs over the side...and it wicks the water out of the port whenever there is condensation or spray gathered there. Pretty primitive but fairly effective.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
You know what the first rule of sailing is? ...Love. You can learn all the math in the 'verse, but you take
a boat to the sea you don't love, she'll shake you off just as sure as the turning of the worlds. Love keeps
her going when she oughta fall down, tells you she's hurting 'fore she keens. Makes her a home.
—Cpt. Mal Reynolds, Serenity (edited)
If you're new to the Sailnet Forums... please read this To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Still—DON'T READ THAT POST AGAIN.