Well my day really sucked.

[cnc33voodoo]

Originally Posted by tager

Ignore the naysayers. Do it for yourself. It can be done. It is not complicated. Just pump the water out of it. It will still be a boat! It will take a lot of work to make it perfect, but it won't take a lot of work to make it sail! It won't even be all that expensive.

Here's one more reason to raise the boat from the dead. It is the respectful thing to do to nature.

Why create the waste? Why support the throwaway culture? You could just haul it out and go sell it or sink it or scrap it. It would be awful to the earth though. I think buying new boats is unconscionable when there are boats lke this that need to be revived. Bugger all the voodoo economics lectures.

From reading a couple of your "thrift" lectures I doubt anyone should take advise from someone who does all their marine shopping at home depot, walmart or the scrapyard.

[casioqv]

Originally Posted by cnc33voodoo

From reading a couple of your "thrift" lectures I doubt anyone should take advise from someone who does all their marine shopping at home depot, walmart or the scrapyard.

Why ignore his advice just because he's found lower cost sources of materials? I think Tager's "thrift lectures" are some of the best information I've seen on this forum. Especially the idea of DIY galvanized rigging- which is cheaper, safer, and longer lasting than stainless steel standing rigging although messier and higher maintenance.

Common sense, craftsmanship skills, and some basic raw materials that can be obtained for free or very cheap are all one needs to build or maintain a sailboat. Expensive new stuff is a nice luxury for those who can afford it, but are unnecessary to people who have more time than money, and want to go sailing anyways.

[casioqv]

Originally Posted by KeelHaulin

You can keep throwing money at an old car until you are spending more than a monthly payment on a new one (and you can't find parts anymore)

I can't think of a realistic scenario where buying a new car would be cheaper than maintaining an old car yourself. I spend about $1000/year on parts maintaining my 1987 Mercedes 190D Turbo, because it's such a rare car that all of the parts are super expensive and have to be shipped from Germany one at a time (they only made about 1000 of these, and only for one year). I can't imagine a car exists with more expensive parts- perhaps a 30s rolls royce or something? The cheapest new car- a Huyndai accent for example would have monthly payments of at least $200/month. My other car- an old Volvo wagon costs that much per year to maintain.

An old sailboat is even easier, because all of the parts are fairly generic. There's hardly a part on an old fiberglass sailboat where you couldn't adapt a used part from a scrapped boat of another brand for nearly free.

Just last month, I saw an abandoned 25 foot boat that was being towed in by a sheriff, and he let me pull all of the hardware I wanted for free, as spares for my C22.

[bubb2]

Originally Posted by casioqv

Especially the idea of DIY galvanized rigging- which is cheaper, safer, and longer lasting than stainless steel standing rigging although messier and higher maintenance.

Avoid galvanized wire. It is less expensive than stainless steel, but it’s weaker and stretches more. When the galvanizing inevitably wears off, your wire will rust.

[casioqv]

Originally Posted by bubb2

Avoid galvanized wire. It is less expensive than stainless steel, but it’s weaker and stretches more. When the galvanizing inevitably wears off, your wire will rust.

Stainless wire will eventually fail from chloride stress corrosion cracking- without warning, and in as little as 10 years of use depending on conditions (salinity, temperature, tension). Galvanized wire will last MUCH longer, and will not fail without significant visual warning (broken strands and rust). If maintained with a rustproof coating such as linseed oil or lanolin it will last almost indefinitely.

It's only slightly weaker than stainless wire, and can probably be used in the same size/weight under the same conditions- because it's more likely to maintain it's full rated strength over it's lifetime.

Nevertheless, I'll still use stainless wire on my boat. It only costs about $150 for enough 316 stainless wire to re- rig my C22, and it won't make a mess, and causes less chafe.

[weephee]

Has anyone heard whether the boat was salvaged or just what happened. I think last week was supposed to be the time for another try.

[WheresTheBrakes]

well.. it's still here.. looked last night and it hasn't moved an inch...

does anyone have a stick of dynamite ??

That's probably the quickest way..

[Bene505]

Here's a boat that you wouldn't have to raise:

FREE Sailboat/Sloop 27' Hunter 1979 - $587 (West Sayvile, NY)

--------------------------------------------------------------------------------
Date: 2009-10-30, 11:45AM EDT
Reply to: sale-qngyc-1444227620@craigslist.org [Errors when replying to ads?]

--------------------------------------------------------------------------------


PERFECT GREAT SOUTH BAY SAILBOAT!!! Hurry before boat is blocked in by winter storage and I have to pay another winter storage fee!!!! "Moondance" Dry docked for almost a decade, however prior to that there was not one thing wrong with her and she was in perfect working order. You could say she was a casualty of 9/11. Now she needs TLC and probably a new engine because she is filled with rain water due to the shrink wrap being ripped . The perfect Great South Bay boat in that she only draws 4 ft. Fiberglass, 9 ft. beam, sleeps 5, full galley, sails like new. Check out what this boat is going for on the internet. It is literally a steal for someone with the time to buff her back to like new!! The only thing you have to invest is an engine overhaul, or possibly a new one. You can most likely keep her where she is by paying the winter storage in this reputable Full Service Marina. No liens, title is free and clear! I just have to let her go and hope someone else can enjoy her! This is a great opportunity for the right person. Please contact ASAP.


Location: West Sayvile, NY
it's NOT ok to contact this poster with services or other commercial interests



PostingID: 1444227620

[KeelHaulin]

Hmm... Boat full of water with engine siezed, in a location where the water would have most likely frozen during the last winter. Sounds like a chainsaw is too good for that hull(k) also; and the owner just wants to be free and clear of her...

[Stumpie]

Originally Posted by midlifesailor

He was just like the chick that wanted to cruise with dogs. Folks with experince cruising all gave reasons why it was a bad idea but the lady could not be disuaded.

Can you post a link to that thread? Thanks.