How to get the SOG on a ST60 speed display?

[r1texas]

I have a Seatalk network connected to a PC using a E85001 converter. I connected a USB/GPS antenna directly to the PC.
So I can have all the instruments displayed on my PC but I don't have the SOG displayed on my ST60 speed display.
Is someone knows a solution?

[blt2ski]

One of the buttons on the dial you click thru it and it will/should show the SOG assuming everything is wired up correctly. far left bottom button IIRC. At least my ST60's will show SOG "IF" I had a GPS hooked up.

Marty

[r1texas]

Yes I found how to display the SOG on my speed display, but I get nothing. I guess that I have a bad connection so?
How do you connect your GPS to the Seatalk network?

[Melrna]

All your Raymarine instruments, including chartplotter, autopilot computer, wind, speed and depth should be daisy chained together in the back of the instrument. There is a custom plug-in wire that does this. There are three plug-ins on the back of the instrument. The left and right 3 prong plug-in is for the daisy chain and the middle one is where it gets the information from the transducers or NEMA 1800 if my memory serves me correctly. I would check the back of the speed instrument to see if you have all 3 plug-ins connected. If you have that than I would check to see if the chartplotter is daisy chained into the other instruments. The GPS info can come from the chartplotter or autopilot computer.

[captden]

Originally Posted by r1texas

I have a Seatalk network connected to a PC using a E85001 converter.

How do you like the E85001 converter? Does it do what you want it to do?
Captden