Learning the HARD way...
Join Date: Jan 2007
Location: Boston / Ft Myers Area
Thanked 100 Times in 97 Posts
Rep Power: 9
Probably not. Realize that the fiberglass at the bottom of the hull is at least 3/4" thick. Looking at the step drill, it appears to have a step every ¼inch. If you used it to have a 1" hole through the hull for the 3/4" fitting, you would have steps in the fiberglass ranging from 1" to 1-3/8" in the bottom of your boat.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
USCG Licensed OUPV Captain, ASA 101/103/104/105/106/118 Certified Instructor - Also certified in Recreational Marine Electrical Systems