Removal of Painted name from Awlgrip Hull

Rustyf · #1 (**permalink**) 01-05-2012

Any advice on how one would go about this would be appreciated.

Many thanks

kd3pc · #2 (**permalink**) 01-06-2012

easy off oven cleaner will work, if you are sure it is awlgrip...

CorvetteGuy · #3 (**permalink**) 01-06-2012

1500 grit wet sandpaper and gentle pressure, keep it wet.

Silvio · #4 (**permalink**) 01-06-2012

Agree with both above. Personally I saw quite good results with Easy Off oven cleaner. Sprayed it on and let it sit for 10-15 minutes. Wiped off with paper towels then rinsed with fresh water.

itsaboat · #5 (**permalink**) 01-06-2012

I just removed the name from a boat we purchased. It was a vinyl decal and the 3M Stripe Off wheel did a great job.

If it is truly painted on this might not work though.

Rustyf · #6 (**permalink**) 01-06-2012

Thanks to all. The advice was very helpful.