Join Date: Nov 2009
Thanked 0 Times in 0 Posts
Rep Power: 6
If I were you, I would test whatever torque wrench you decide to use. The only bolts that I have stripped in my car hobby work have been done with a torque wrench. I'm not sure how you strip a 1 inch bolt but I'm pretty sure that it would be done with a torque multiplier and these would be bolts that you really don't want to strip.
A 350 test would be accomplished by hanging your mother-in-law one foot from the bolt (axis of rotation) or you could use a 175 lb person 2 feet from the bolt or do the math for whatever weight and breaker bar that you have using a fixed test bolt.
Just kidding about the mother-in-law BTW, mine is a wonderful woman and very svelte.