Hi All, Where did the month of May get off too? Update: We have Hull # 806. Yr. '76.
I will try aand post pic soon. The rudder has a crack in it. from the top, down the outer edge, about 3" past the mounting plate. How do we remove the bolts that hold the rudder to the mounting Plate? It appears they have been riveted on? They will not budge. :confused:
Thanks for any comments.
Pix or it didn't happen.
Yes need pixs. I have hull #552, also 1976. Sounds like you may not have the original rudder. The original attaches between two large aluminum plates with a 3/8" bolt. This is so the rudder can pivot up id grounded.
|All times are GMT -4. The time now is 03:40 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
(c) Marine.com LLC 2000-2012