Mixer for the yanmar 2qm20h exhaust
can i patch it. it has a small hole in it , im sure the bolts holding it on will fail if i try to remove it
Re: Mixer for the yanmar 2qm20h exhaust
If the bolts are really in that tough a condition you really ought to fix that... you don't want that part 'falling off' at any point.
It's probably a casting so fixing it (patching) may be problematic though it might be brazable. If you can reuse the mounting flange fabricating your own elbow is not that big a deal if you have access to a welder's services.
|All times are GMT -4. The time now is 01:58 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012