Laerling Dingy Project
I have to install a chain and wire steering system with a quadrant on a Laerling dingy as part of a design project. I'm going to machine the quadrant using a cnc machie and I'm just wondering if anyone has any advice for me on machining quadrants using a cnc machine?
|All times are GMT -4. The time now is 03:39 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012