SailNet Community

SailNet Community (http://www.sailnet.com/forums/)
-   Islander (http://www.sailnet.com/forums/islander/)
-   -   Islander Bahama 30 (http://www.sailnet.com/forums/islander/64806-islander-bahama-30-a.html)

rlange 05-17-2010 06:07 PM

Islander Bahama 30
 
Interested in an owners manual as well as an auxiliary tiller. Thanks, Bob

kentg 05-18-2010 07:06 AM

try islandersailboats.ca, someone has already scanned one. If not, I have the manual for my 1981 B30 that I can scan. PM me with an email address.

dacap06 05-24-2010 11:24 AM

Year of your Island 30?
 
Bob,

What year was your Islander manufactured? Did you get your scanned manual? I have the manual for my '84 Islander Bahama 30 that I can duplicate if need be.

Tom

devemaster 06-21-2010 08:20 AM

I'm looking for information from anyone who has rebuilt the cabin sole of an Islander Bahama 30. I'm looking to purchase a boat that has delamination issues on the cabin sole and possibly rot issues below in the floor frame.

Does this floor frame run beneath the settees, cabinets, etc.?

Is it wood or fiberglass?

Any pictures or info regarding the compression post substructure on the B30?

Thanks.

progolfer 07-08-2010 11:13 PM

I am also looking for a manual for a 1980 manual for I 30

progolfer 07-08-2010 11:14 PM

Another thing has anyone had any problems with flexing in area of compression post?

progolfer 07-08-2010 11:16 PM

subfloor rebuild
 
I am having a survey completed this weekend possible issue you are discussing if I can get a pic ill figure out how to post and send it to you or you could post your email t

progolfer 07-08-2010 11:43 PM

islander 30 encapsulated keel or bolt on 1980 model

progolfer 07-08-2010 11:43 PM

If incapsulated what is easy way to determine separation

huguley3 07-10-2010 08:33 PM

Mine seemed to have some flexing of the wood that spanned the hull under the floor where the compression post sat. Not sure if someone had overtightened the stays or if it was just age. The surveyor just said it was something to keep an eye on and I have been and it has not changed.

Quote:

Originally Posted by progolfer (Post 620803)
Another thing has anyone had any problems with flexing in area of compression post?



All times are GMT -4. The time now is 01:17 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012