We have a folding prop that is too big and too steep. I'm having the boat hulled tomorrow and I'm having the prop adjusted. I'm wondering if anyone knows the size and pitch of the original prop that shipped with the Universal 5432? Thanks.
No, I'm pulling a 41ft boat because I don't have a smaller one . And while it's out I'm replacing two gate valve seacocks, inspecting the rudder, replacing the zincs, painting the bottom, re-sealing the strut, re-pitching the prop, adding a grounding plate for lightning protection and another for the SSB, replacing the cutlas bearing, and adding a stainless fitting so the exhaust doesn't make a mess of the hull again.
Connect with Facebook
That's an expensive way to go.
. And while it's out I'm replacing two gate valve seacocks, inspecting the rudder, replacing the zincs, painting the bottom, re-sealing the strut, re-pitching the prop, adding a grounding plate for lightning protection and another for the SSB, replacing the cutlas bearing, and adding a stainless fitting so the exhaust doesn't make a mess of the hull again.
