|Topic Review (Newest First)|
|05-08-2013 07:50 PM|
Re: SR Mariner NAV-5A connector
I'd try some DeOxit or other electronic contact cleaner first, if you haven't already done so. Spray it liberally on both connectors, let it dry, and work the connectors together a few times. You may be surprised!
|05-08-2013 01:04 PM|
SR Mariner NAV-5A connector
I have an old SR Mariner NAV -5A/10 that has a corroded main wire harness connector. The connector is a 16-pin, female connector which all the sensors connect to the back of the main station computing unit. This is giving me incorrect readings, so I would like to replace it. The manufacturer said they do not have any, so does anyone know where I can get one. The connector is about 3" long and has set-screws to fasten the wires. I don't care if I have to solder the wires to it; I just need one that will slip down on the male pins which are on the PC board.