|Topic Review (Newest First)|
|07-14-2008 07:19 PM|
Is really into 6 year old threads.
|07-14-2008 06:55 PM|
Originally Posted by jodyeh View Post
A simple bungee cord to the shrouds on external halyards does the same thing, except in high wind they whistle, but then so is everything else.
|07-14-2008 06:50 PM|
|jbondy||Our halyards were rope/wire hybrids, with the wire matching the masthead sheaves. We replaced them with a rope/rope hybrid, with a smaller rope that could pass over the wire sheaves with no problem, spliced to thicker rope for us to handle. When at anchor, external halyards can be held away from the mast with bungees to the shrouds so there is no noise. We also went with rope lifelines (Amsteel).|
|07-14-2008 08:29 AM|
If laid out properly, internal halyards don't bang. They just have to be led down the center of the mast. Then, if they're tensioned, they can't touch anything unless the motion is pretty violent.
If you're hearing noises from an internal halyard mast, it's more likely to be the wiring that goes to your spreader, range and masthead lights, or the coax for the antenna. Getting rid of that noise can be done, but it requires jumping through a lot of hoops. My old Morgan and Island Breeze have conduits that lead up inside the mast for wiring, a chore that was accomplished when the masts were new, and before the cap on the mastheads were installed.
|07-14-2008 08:03 AM|
I have internal halyards and they bang when at anchor. i only hear them when I am trying to sleep. so what is up with that? something is loose inside the mast? have a freedom 32, 1984. any suggestions other than unstepping the mast? jody
|11-23-2002 07:27 PM|
Obviously you have never spent much time around boats with internal halyards. Actually I have had internal halyards on half a dozen boats over 25 years and have never had the halyards slap inside the mast. I also have not noted chafe on the halyards within the mast. The part of the halyard within in the mast usually looks new while the part of the halyard on the outside of the mast most of the time UV degrades. I usually have replaced halyards that have begun to sun rot or which have been chewed up where they are cleated off. The only halyard that I ever had chafe on anywhere else was an external halyard that chafed on a spreader bracket when tensioned under sail.
|11-23-2002 05:57 AM|
It''s my understanding that internal halyards make a lot of noise slapping against the inside of the mast, not to mention the added chafe. I suppose the reduction in windage may be worth it to some but I''d appreciate it if you''d just drop hook for the night somewhere else!
|11-22-2002 07:15 AM|
you''ll also need to change out the sheaves if you go to rope.
my current boat has an Isomat mast with internal halyards and I have never been happier.
|11-12-2002 08:28 PM|
DWH, do you have mast head sheaves arranged to accommodate halywards inside the mast?
|10-12-2002 06:54 PM|
I have a 1975 Ericson 25 centerboard with external, wire halyards. I am considering installing the halyards inside the mast and going to rope halyards. Good idea? Bad idea? Any suggestions or tips would be appreciated. Thanks for your response