|Topic Review (Newest First)|
|06-27-2008 01:31 PM|
|Vasco||After you've sewn the new one in place pierce the old one at the edge near the canvas and cut it out. Fairly simple operation.|
|06-27-2008 01:25 PM|
|egle01||Ok. I'll see what I can do. I just think it’s going to be very difficult to get the old one off with the new one in place. Thanks for the tips.|
|06-27-2008 01:16 PM|
The reason you want to leave the old plastic in until you sew in the replacement is the cloth won't hold its shape or position very well without the rigidity of the plastic in place, and will make it really difficult to sew in the replacement accurately.
Originally Posted by welshwind View Post
|06-27-2008 01:12 PM|
Thanks for the replies. I got some UV thread today and plan on picking up the window on my way home. This is tomorrow's project!
Not sure how I would leave the old window on and put the new one on at the same time. But I will use it as a pattern to cut the new plastic.
|06-27-2008 01:10 PM|
"Remember, don't remove the old plastic until you have the new one sewn in".
Why? I unfortunately put my hand through my dodger window the beginning of this year and we plan to attempt to repair it ourselves. I would have thought you would take the old out, use it as a template when you cut the new piece and then sew it in. Since your advice is contrary to my intuition, I thought I'd ask for the rationale behind it so I can learn.
|06-27-2008 11:57 AM|
|rchad||There's a very good article in Good Old Boat (March/Apr 07) that describes three methods of replacing dodger windows. The writer uses 30 mil plastic. I haven't tried to do that yet, but that article and Sailrite.com are good sources of information.|
|06-26-2008 09:36 PM|
|sailingdog||There have been a few good articles in the sailing press about how to do a window replacement for dodgers in the last six months or so. Be worth taking a look at them to get some ideas.|
|06-26-2008 06:41 PM|
|ADMTROX||I have not done the window, but I have worked on covers and my next project is the bimini. I get my supplies from www.sailnet.com.|
|06-26-2008 04:14 PM|
|Vasco||Give it a shot. Remember not to remove the old plastic until the new stuff is sewn in. We did it and it worked fine. Especially when you see what the canvas guys want to do it.|
|06-26-2008 03:38 PM|
I wouldn't use inferior (read cheap) plastic - it simply won't last. There are products like strataglass and lexan etc that do excellently duty as windows.
One other point: any plastic/acrylic/whatever you use that will stand up to the service will be tough to sew through, you'll need access to a heavy duty upholsterer's (or sailmaker's) type sewing machine - and the skills to use it.
|This thread has more than 10 replies. Click here to review the whole thread.|