|Topic Review (Newest First)|
|07-23-2008 09:37 PM|
|lofrpc||Please see my posts on page two of this web site. Always happy to discuss my experiences with the S2 9.2C (email@example.com). Please note I will be away from the computer for most of next week, but around after that.|
|07-23-2008 09:33 PM|
To those of you suffering compression post problems
I should suspect that there is water in your bilge, which is infiltrating from the anchor locker, to the front bilge, then spilling over into the stoareage areas under the setees in the main cabin, and under the are where the compression post is. For years, I would find water in the shallow area under the compression post during our rainy season here in Florida. I always though that, somehow, it was getting in via the mast fittings. Not so. Since I fixed the anchor locker problem there has been NO water EVER in the area under the compression post (thus, no rot in 22 years). See my posting on page two of this site with regard to how to address the leakage problem from the anchor locker.
|07-22-2008 01:19 AM|
Thanks Guys and Gals,
You all seem to love the S9.2 in your own way and everyone appears happy with the coastal performance and accommodation she offers in both the aft & central cockpit arrangement. I have still not had the opportunity to see one of these little ships first hand as work is always a priority. The only real response to my question came from “Camaraderie” whom, I deduce, is talking from the experience and platform of a bigger vessel.
With further research I have concluded that the S9.2 c is not the boat to cross the pond, because of its high volume and cork like reputation. Though my intent is a onetime one way trip I would hate to struggle on the journey due to bad Ocean going qualities, to find that I wish to go further but the boat doesn’t.
I have yet to overcome the belief that every boat is a compromise so I am now pursuing a cross section of heavy displacement, Long/Full keeled vessels between 30 & 33ft of which there are few examples. As I have never been a lover of the retractable center plate/board, I have narrowed the field to five or six potentials; Cape Dory 30 & 33, Bombay clipper 31, Westsail 32, Downeaster 32, or the Yorktown 33, Has anyone any views on these???
The Hunt goes on. My present boat ‘Rip Tide’ will find her way down the family ladder and the new vessel will be named ‘Ebb Tide’ when I find her
Thank you all
|07-21-2008 10:37 PM|
22 Year owner of S2 9.2C with lots of opinions/maintenance experience
Folks. It took me seven years to do it, but I finally found out where that leak in the v-birth (that kept filling the forward bilge) came from. Turns out the anchor locker is a pre-fab unit glassed into the bow. It had seperated from the hull where the drain holes for the anchor locker are. So, . . . when the anchor locker was wet it ended up funneling the water into the v-birth area. Took out the decorative board at the foot of the v-birth and filled the void between the locker and hull with 5200. Voila! The forward bilge has been dry ever since. Perhaps a better fix would have been to construct a threaded tube fitting to go through each drain hole and then bed that in 5200. That, however, is beyond my mechanical abilities. Any questions about S2 9.2Cs? I will be pleased to share my experiences! Love the boat, although there are tradeoffs, . . as with any vessel.
|06-30-2008 10:48 AM|
Last Thurs. I hauled our 9.2c for the first time since we bought her last fall. No blisters and there was still zink left on the shaft. Dropped the mast to install mast steps. Also the KBW10 tranny needs to be rebuilt. Hope to get her back in the water next week.
So the list goes on:
1) Bottom prep and paint
2) Tranny rebuild
3) Mast steps install
4) Dripless shaft seal
5) New zinks (including engine zinks)
6) New mast wiring
Important note: When hauling, make sure the strap is behind the prop and just in front of the skeg or too much pressure may bend the prop shaft. There's not enough room aft of the keel and forward of exposed shaft for a hauling strap.
|06-27-2008 02:47 PM|
I have an 1984 S2 9.1 that I had to replace the mast step that is a very commom problem with the 9.1s and I assume it is the same on your boat. Check the 9.1 web site, there is lots of info on various issues with these boats. If you want specifics of how I fixed mine, PM me.
|06-26-2008 07:09 PM|
I have a 1978 S2 9.2C that I have lived aboard since 2002. I am at the tail end of over two years of a complete re-fit that included a new engine, rigging, sanitation system, hull and deck paint, a complete bottom gel strip (330 blisters) letting the boat dry out for over 8 months before applying 10 gallons (yes 10) of west systems epoxy, 4 gallons of interlux barrier coat and 3 gallons of trinidad bottom paint, new batteries, new dodger and bimini top, and a bunch of other "stuff". I'm right in the middle of replacing the main floor frame under the compression post and let me tell you it is no small job. (of course, to be fair, it seems that nothing really is.) I have pictures of almost everything and if you email me at *** what a bummer!!! I can't post my email address, lets see... okay so I can cheat... it's "mikethecapt" and it's at hotmail, got it? Great! I will be happy to share all I have and all I have learned about this great little boat. I work as a professional mariner and have spent the last 34 years at sea on ships of all sizes and have lived aboard or at least puttered about various small boats my whole life. although this boat is no where as stout as say a southern cross or a westerly, it is more than robust enough to hop up and down the coast or sail the caribbean. With that being said, pick your weather and don't be a fool and you can sail anywhere provided xxxx dosen't happen, but knowing that it can and sometimes will, well that's why it's called freedom. There's a ton of lesser boats sitting on the hook in paridise because there owners didn't know that they couldn't sail them that far. Good luck and congrats on finding what I think is one great little cruiser.
S/V Plan B
|06-23-2008 01:28 PM|
|surehart||I've heard of this happening, but not to S2s. Usually due to standing water in the bilge which rots out the base. It is a simple fix. Good luck!|
|06-23-2008 01:56 AM|
|kiminpr||We too just purchased an S2 9.2C this past April. It's a 1983. Appears to be in terrific condition except that the compression post is sinking into the floor... We noticed that the table did not sit down completely on its little hooks. We have had a techy look at it and it appears to be something that can be fixed without huge cost. Has anyone had experience with this issue? I would love to see some pics of the (re)finished product.|
|04-29-2008 12:53 PM|
We just bought a 1977 9.2c. There were no manuals, etc., onboard and the PO was absolutely no help, so it's been an adventure figuring the systems out and bringing everything back to life.
She had been neglected for several years, but after a gentle power wash to remove the Oregon State Flower covering we found her sound and dry. Amazingly, there was no water in the bilge. Good thing, because the bilge pump had been inoperational for years without power.
Following is a list of components we've dealt with and brought back to life:
Engine: 2QM20 rwc. Replaced the tach drive unit after full service
Batteries: New gr27, starting, 2 6v Trojan golf cart, house
LPG: New external hose and 10# alum. horizontal tank
Oven: 4-burner Magic Chef w/oven. Replaced oven pilot
Refrigeration: Addler Barber Danfoss cold plate. Replaced the control module
Hot water: On-demand LPG. Repaired freeze-burst in coil
She sails well and feels solid and responsive. Comfortable for two large adults and the dog.
We'd be interested in communicating with other 9.2c owners.
|This thread has more than 10 replies. Click here to review the whole thread.|