|Topic Review (Newest First)|
|01-19-2013 12:40 PM|
Re: Cape Cod Marlin 23' refit
My idea of a long distance cruise.. is enough clothes for a week, my broken down bicycle, food, water, and safety gear. My goal is to sail from Atlantic City to Florida putting into a port every evening (even if just a sheltered place to drop anchor) and out every sunrise.
It's just me as my G/F idea of "roughing it" is an econolodge (this idea may put paid to this relationship)
So. now that I know what to expect, I can plan accordingly. Friend of mine thought she would be a 3 knot boat.. so that seems about right.
|01-19-2013 11:21 AM|
Re: Cape Cod Marlin 23' refit
Fast is a relative thing. Clearly a properly handled, well designed modern boats will be faster on all points of sail and in all conditions.
But once you get past that kind of comparison, the Marlin was actually a pretty fast boat for its era and intent. The hull design is such that for a long keeled boat it has comparatively little wetted surface. As with many Herreschoff designs, its waterline was long for that era, its bow was comparatively fine, and the run and counter was straight, clean and close enough to the water to be helpful. These boats had a pretty good sized sail plan, and the original fractional rig was an easy rig to sail.
All of which is to say, these boats sail well and were comparatively fast for their day. And that performance can be improved over the boat in stock form and as you typically find them, by making sure that you have decent modern shaped sails, an efficient mainsheet and traveler, and a vang.
If properly set up, you would expect to be able to reliably average 2-3 knots in a moderate breeze, and perhaps 4 knots in a really solid wind. That may sound slow, but average speeds are deceptive since you either need to do stay close to the average speed reliably and consistently, or be able to sustain higher speeds for short bursts to offset the slower speeds in the averaging.
The one thing that I will say about boats like these are that they have comparatively small carrying capacities relative to their displacement. When yacht designers evaluate how much a boat can carry, they look at the displacement of the boat and the percent of its displacement it can carry before it becomes dramatically slower and more dangerous. The good news is that these boats have a pretty high displacement for their length. But the bad news is that the perentage of displacement that a boat can safely carry is mostly governed by the area of a boat's waterline plane. Boats like these have comparatively small waterline planes and so can tolerate a smaller percentage of their displacement as carrying capacity.
In other words, if you are going distancel cruising, you need to be disciplined about not overloading the boat with too much stuff. Years ago, the norm was to cruise very spartanly. But that expection has changed for most folks, and so there is an increased expectation about the sheer amount of stuff that people feel that they need to drag along. More and more, boats get loaded down with all kinds of gear either for 'safety' or in an attempt to approach all the comforts of home.
Neither approach is inherently right or wrong, but this type of boat does not permit the choice of cruising in a fashion which is 'just like home'.
Lastly, the Marlin was designed as a daysailer, overnighter, and when the cruiser version was built, it added a lot of weight which would further reduce excess carrying capacity and performance.
Great boats though.....
|01-18-2013 11:13 PM|
Re: Cape Cod Marlin 23' refit
I love the looks of the Marlin and I think I will be looking for one of the elusive "cruiser" models this next fall.
My question concerns speed. I want to do some coastal cruising up and down the East Coast.. any idea how fast she actually is so I can do some planning?
|02-01-2012 04:31 PM|
There used to be a Cutter-rigged Marlin daysailer in Wareham on the mooring next to ours when we had our CAL 21. I think she was a 1960 model, when the owner bought her she had one of those ugly lifting outboard brackets that placed the raised outboard up to the point that it looked ot be floating in mid-air. That bracket on "Starry Night" looks good in comparison. Later they installed an outboard well at the aft end of the cockpit, offset to one side to clear the keel and rudder.
She left Wareham about a year or so before we sold our CAL, I think CCSB brokered her sale, her name was "TANGLE" in those days. Now, with a new name she is for sale again, I think she is up in Maine, although CCSB has her listed again, $8,000.
The last new MARLIN to leave CCSB was in 2007 I believe, and I think her owner's wallet was probably about $100K lighter when he left Wareham! Home port is out West, Colorado if I recall?
The next new MARLIN will be more of a competition to the Bridges Point 24, CCSB has designed a new deck mold that is more tradional, looking more like a Herreshoff MARLIN, rather than the "upside down bathtub" design of the fiberglass MARLIN Cruiser.
Someone mentioned the ungelcoated areas of the deck on old MARLINs, CCSB did that on a lot of their cabin boats in the 1950-60s, it served as a sort-of "skylight" letting light in through the laminate without making holes for ports. I think I would have varnished those areas if I wanted to preserve the translusency. Painted over it if installing deadlights.
|01-11-2011 07:06 PM|
Hi, I just bought a '61 Marlin and would like to know if you have solved the weather helm question...thanks John Ehlers email@example.com
|04-07-2009 01:54 AM|
Hi . . . I have a question for Marlin owners and restorers. I have nearly completed the restoration of a Marlin that has been in my family since 1960, but I remain stymied by the pronounced weather helm and wonder whether some adjustments in the rigging might address that problem. Any ideas?
|03-19-2009 01:45 PM|
|miatapaul||Nice boat Brodie. Looks like she is coming along nicely.|
|03-03-2009 09:59 PM|
|softmisiu||hi Remarkable! good to see there are even more Marlins being sailed and restored out there... for all of you interested in sharing information and ideas about these remarkable sailboats we now have our own mailing list - you can review recent posts and sign up at marlin-owners : Marlin Sailboat Owners|
|03-03-2009 06:49 PM|
I just went through the last few Marlins posts and have been glad to see all the information and pictures of Marlins. It's hard to believe that these boats are still being sailed and saved. I have owned our Marlin for 6 years now, and have been restoring for three years. The boat is heavy and built to last. I am new to the site and will create a longer post with pictures about "Remarkable"
|11-22-2008 09:30 AM|
Nice boat and well done, congratulations! I also have a daysailer version of Marlin, got her two years ago from a boatyard in NYC in a state of total neglect and am slowly bringing her back to life, photo below.
I'd strongly recommend painting over the cabin sides as the exposed resin gets damaged from all the UV radiation which over time affects structural integrity. Back in the 60's they didn't know much about it so they left it unpainted, these days even CCSB paints the sides over when they restore a Marlin.
|This thread has more than 10 replies. Click here to review the whole thread.|