|Topic Review (Newest First)|
|12-06-2008 02:03 PM|
Originally Posted by otaga05 View Post
Nice construction you've done. How is it working out?
I'm planning on 1.5 inch PVC for the ridge pole, then 1" PCV coming down from it every 5 feet. They connect using a T that is 1.5 inches at the ends and 1" at the middle.
I'm also thinking about building-in an overhang, king of like the number "4", wjere the slanted part of the 4 keeps slanting up to the ridge pole. This is to keep the rain off the deck and allow ventilation.
|12-05-2008 07:26 PM|
I wrote back in October to say I too was pleased with The Canvas Store cover. Price was reasonable at $3000 for a 44'. It comes down to the caprail and attaches securely to the stanchions. Great for in water storage as you don't have to run lines under the hull, though I do when it's on the hard.
However for those still looking for a cover at this late date, I recently met Carl Pellegrini of seacanvas who was at my marina. There are two of his covers on boats and he was building two more. High quality and they cost about 3.5K for a 45'.
While it's similar to The Canvas Store cover Carl takes meticulous measurements to get a good fit the first time.
He's located in New Jersey. No financial connections.
|12-05-2008 04:39 PM|
I finally got some pix of our winter cover from the Canvas Store. Enjoy/criticize, whatever your preference.
|12-05-2008 11:55 AM|
|sailingdog||I cheated in making the framework for my boat. The Telstar 28 has a mast raising system that lowers the mast and leaves it sitting about a foot above the deck. I built plywood beams that sit on the mast and then used 2x4's to connect the tops of the vertical beams as a ridgepole. Then I threw a big tarp over the whole thing. There are three pairs of ratchet straps acting as guys to hold the ridgepole on center.|
|12-05-2008 09:36 AM|
Yes, I plan to take pictures.
I have to wait until the boat is on the hard first. Meanwhile, I plan to take all the little peices and put them on the boat, so I don't have to haul them up later. The 10 foot pipes I'll do once she's pulled. There's no point trying to get them all to the far end of a long dock with a small dock cart. After she's pulled, I'll just lean them up against the hull and grab them from above.
Oh and I saved the 24 empty one-gallon antifreeze containers for use as weights once they are filled with water.
|12-05-2008 09:06 AM|
|12-05-2008 08:56 AM|
OK I bought about 400 feet of PVC pipe and some of those blue tarps (40x30, 20x30, some smaller ones too). I bought connectors of all shapes and sizes, including many 45 degree connectors, since I'm planning a special design. The goal is a reusable structure an inexpensive tarps that get replaced every year. Second goal is to have an inner, secondary cover over a few haches that I'll leave open all winter for ventilation.
If anyone wants to enjoy a large-scale tinker-toy project in the next few weeks, let me know.
|12-05-2008 08:39 AM|
Not really workable. Most of those aren't high enough to fit a boat underneath. A boat up on stands is often close to 12' high or so. Also, many aren't long enough to fit over a boat, since most are less than 20' long, and most boats would be longer than that.
Originally Posted by mrwuffles View Post
|12-04-2008 08:59 PM|
|mrwuffles||What about one of those canvas garage like things get one rv size 2-car it could fit a good size boat probably and youll have room to work on the hull and up on deck....just a thought|
|12-04-2008 08:53 PM|
Originally Posted by Maine Sail View Post
|This thread has more than 10 replies. Click here to review the whole thread.|