|Topic Review (Newest First)|
|02-19-2009 05:41 PM|
Originally Posted by baboon View Post
|02-19-2009 02:56 PM|
|baboon||Ablative bottom paint makes sense if you are going to store her in the water, but think twice about painting above the waterline. Gelcoat is pretty amazing stuff and can often be brought back to life with a polish and wax job. Topside painting is expensive, difficult to repair when (not IF) damaged, and will do nothing to improve the comfort or performance of your boat. If you must paint, wait until you have sailed a season first and have learned how your craft handles. You will be less likely to bounce of a dock and mess up hours of hard work painting the hull. One of the those "don't ask me how I know" statements.|
|02-19-2009 01:25 PM|
|AllThumbs||All the black gets ablative bottom paint.|
|02-19-2009 12:59 PM|
Originally Posted by SailingFlorida View Post
Lots of Topsides Paint out there. Thats like asking what anchor I should carry. Your going to have to do some research. A talk with your local chandler will help. Awlgrip, Awlcraft, are a couple but they can be expensive and difficult to use for the DYI.
This link might help, it has some tips on DIY Topside Painting.
Sailing World - The Do-It-Yourself Topside Paint Job
|02-19-2009 12:21 PM|
Here is the door finished:
Also I took some picture outside how far up on the boat do i need to go non ablative? What other kind of paint do i use for the rest up to the rubrail?
|02-06-2009 03:25 PM|
Originally Posted by bljones View Post
How high up do i want to go on the paint? I figured if i did the whole hull then im covered.
|02-06-2009 03:23 PM|
Originally Posted by Melrna View Post
Too late on the drop boards ive found a place to stow the door while sailing so that wont be a problem. As far as the weight I dont think that the tile will add that much weight to the boat to be a problem. Add it is even bulkhead evening ea side out and the counter top and table evening ea other out.
|02-05-2009 10:29 AM|
|Melrna||Sailing Florida.. You will love the Tanzer 22. It was my first boat. I raced her for 4 years and won many a race with her. Be careful how you had weight on her and not move the CG of the boat. Those tiles while look pretty could had weight where you don't want one. I had a 9 Hp Volvo outboard that never worked. Hence I learned fast how to sail her in and out of slips. My point is she is real easy to sail. Keep the hatch boards separate if it is not too late. Trust me on this one. If you have the swing keel version check the pin and wire rope carefully before you launch her.|
|02-05-2009 05:51 AM|
|sailingdog||Having separate dropboards rather than a single giant dropboard also makes it easier to swap one out to ventilate the boat when at anchor and such.|
|02-04-2009 10:33 PM|
|bljones||Whoa. You plan to paint the whole hull with anti-fouling bottom paint? BTW, now that you have fastened the dropboards together into one large board, do you have a plan to stow it? You may find it is less cumbersome if the dropboards remained separate, rather than being screwed together into one large door.|
|This thread has more than 10 replies. Click here to review the whole thread.|