|Topic Review (Newest First)|
|06-18-2009 06:23 PM|
Originally Posted by dgr View Post
Thanks for that link, it was interesting.
|06-18-2009 06:08 PM|
A depression? Mine was stepped in a deppression, too. But that was caused by 40 years of rig tension and .... It seems like a real odd design to have a low point on the cabin roof where water could pool.
You can see a few pictures of one way that deck-stepped masts are done in this thread and the work to remove the depression and replace the mast-step and add an organizer plate (oddly enough, the same one that Dog has a picture of.) Finishing up the mast-step repair (lots o pics) - Anything Sailing Forums
|06-18-2009 04:29 PM|
Originally Posted by zz4gta View Post
There is a pair of blocks bolted to the deck at the base of the mast which I think are for the reefing lines. I could put similar blocks next to them, one on either side, and run a cunningham line through one, up to the sail cringle, down to the other, then bring them aft with a purchase somewhere. If I do that I can adjust it from either side.
I can do the same with the clue outhaul. Of course the boat's beam is less then 10 feet so it may be over kill.
I don't see this all happening by Saturday but at least I was able to secure the gooseneck so I can tighten the halyard.
|06-18-2009 04:03 PM|
Jarcher, I also like the "Fixed Boom" idea best but I just thought I'd show an example of how the adjustable boom was done by Seldon (or maybe Nauticat) on my boat's mizzen. Because of the steering station right at the mast a vang wasn't an option (head clearance) so I believe that's why they added the adjustment. Since the boom adjusting slider is held to the mast you wouldn't really need special "car blocks" just secure to the slider on top and mast base at the bottom.
|06-18-2009 02:23 PM|
Leave the track alone, lock it down the next time you're at full hoist and are happy w/ light air sail shape. You'll have to find one design class rules on the luff length and black band measurements.
And just rig a cunningham.
|06-18-2009 11:36 AM|
Originally Posted by bheintz View Post
So that leads me to ask, how far below the mast head should the top black band be? Once I know that I guess I can measure to see where the gooseneck belongs. I did have in the back of my head that if I replace the track then I am not sure where to locate the gooseneck.
|06-18-2009 11:24 AM|
Originally Posted by jarcher View Post
Thus to get optimum luff tension easily a Cunningham is by far the simplest.
|06-18-2009 11:05 AM|
Originally Posted by pvanv1 View Post
Also, my topping lift tends to foul in the top batton, screwing up the shape of the sail. I am thinking of replacing it with a "boomkicker" from:
If I do install the boomkicker than the gooseneck needs to be fixed at one height. I have not decided yet. I may just need to increase the length of the topping lift so I can release it more.
For now, I am going to look for a way to get any kind of down haul rigged for the weekend. After that the mast is coming down for some work anyhow, so I can rerig the entire thing.
|06-18-2009 08:04 AM|
I have a sliding gooseneck on my HR28. That was part-and-parcel with the old-school roller booms of the 60's. Wouldn't replace it like that today, but since it's existing gear, we use it.
We don't use the roller function, but the sliding gooseneck with downhaul is a good thing -- to allow our Dutchman to be tensioned at rest, yet relaxed when the sail is hoisted. We release the vang and downhaul, hoist fully, and then tension the downhaul to adjust luff tension, just like a cunningham.
FWIW, We do run McLube on the gooseneck track, as it isn't as low-friction as it could be.
|06-18-2009 12:10 AM|
Depends on the boat. But many have a mast step that is essentially a plate that the mast sits on. For instance, this is the mast step on my boat.
It is basically a three-sided box that the mast slides into. It has plates attached so I can use blocks to lead lines aft, and has two holes for safety pins that prevent the mast base from moving forwards.
On a lot of boats, you could mount that plate where the mast sits on the cabintop by loosening the shrouds and stays a couple turns...since it is only 1/16" thick or so.
Originally Posted by jarcher View Post
|This thread has more than 10 replies. Click here to review the whole thread.|