|Topic Review (Newest First)|
|10-07-2011 01:33 PM|
Originally Posted by beaufait View Post
|06-11-2011 04:25 PM|
|rhr1956||I bought a 1978 Pearson 26 OD in March. It had no rudder. The guy I bought it from had a Catalina 27 rudder cut down and sleaved it onto a new stainless rudder post. He gave that to me me with the boat. I finished some glass work, sealed with epoxy and painted it with anti fowl. A buddy helped me installed it in the water. We slipped the new lower bushing onto the rudder post. Tied a wire bail to the top of the rudder post and tied a rope to that. Then ran the rope up through the rudder tube. He guided the head of the rudder post into the opening and I pulled the post up through the floor of the boat. Installed the top bushing and washer, new collar, tiller head. Bingo! Works great.|
|05-20-2011 04:15 PM|
P26 first sail
We got the Janna's Dance out for a nice sail last week. The wind was perfect the water flat. It was a sweet day and a nice sail. The new rudder makes her handle beautifully. Now all I have to fix are the leaking ports and I can start tuning up the interior. I'll try to add some pictures soon.
|03-25-2011 09:11 AM|
|beaufait||Oh, my p26 is a standard.|
|03-25-2011 09:10 AM|
I didn't try to remove the nuts normally. I picked up a nut breaker and a chisel from Harbor freight for about ten bucks and cut the nuts off. Many were so corroded that simply hitting with a hammer caused them to disintegrate. The bolts were actually in pretty good shape. The nuts were exposed to fresh water from leaks around the windows. (My next big project) I felt that stainless was a better choice in the bilge. After looking at the posts here it was stainless or bronze and I didn't have the money or the time to get the bronze. These should last for the life of the boat. (I hope!)
|03-25-2011 09:02 AM|
No digging. I was on the marina hard top. I installed the rudder when they picked the boat up to launch. The rudder tube was in perfect condition and I had already test fit the bushings so it took less than a minute.
|03-24-2011 04:44 PM|
Also, did you have to dig a trench or pit to get the new rudder installed?
Your boat (or any boat) will move a lot faster through water without a beard 2" thick of barnacles.
I do love the lines of the P 26. Looks like my boat (T 27') from 50 yards away. A not too distant 2nd cousin?
|03-24-2011 02:58 PM|
Is she a one design or standard P-26?
I have a P-26 One Design/weekender Hull # 74 (with the long cockpit).
How hard was it to remove the original keel bolts? You made it sound “easy”. It’s on my list, did you take any photos?
Also, you mentioned Stainless bolts? I was under the impression that without oxygen Stainless breaks down and can pit/corrode.
|03-24-2011 09:17 AM|
p26 my vacation
I took 2 weeks off of work with the weather turning nice to get all of the maintenance done on our new to us p26. We bought the boat in OCT of last year and it has been too cold to bottom paint since then so this is the first chance I have had to do any real work. We dropped the mast at haul out and I was able to replace the lights, (both of which were shot) and the halyards. I spliced the rope to the wire halyards myself. It took 2 hours a piece because I am a rank newbie but in the end they looked very professional.
When we pulled her there was a coating of barnacles a full 2" thick all over the bottom of the boat. The bodies came off quickly but we spent 3 days scraping the little feet off. Then 2 days of sanding and finally paint. The yard noticed some separation in the keel as we were scraping so I replaced and re potted all of the keel bolts with stainless. I plugged the holes and faired the joint with west system. Finally we replaced the rudder with a new DR marine unit, renamed her Janna's Dance and launched yesterday.
She moves very easily through the water. When I brought her over from Seaford it took all the motor would do to get 2 knots. Now, at idle I am moving to fast to dock by myself. I can't wait to get under sail. The weather that was so cooperative during my vacation has decided that I have to wait for our first sail. I guess I will spend my time replacing the rest of the running rigging and dreaming of sunny days.
|01-24-2011 09:27 AM|
Yep the bushings were included. It should be at these prices but I love having the original part.
|This thread has more than 10 replies. Click here to review the whole thread.|