|Topic Review (Newest First)|
|12-30-2011 08:36 AM|
There are two nice fesh water unions down in Chicago. One a 36 and one a 32.
You can find them on Yachtworld. I am going to check out a 38 Shannon in the same yard and will report if they meet the "standard" of excellence. Alot of great boats up here to be had at a discount this winter season. Plus no snow to speak of , yet, so a good time to look.
|12-28-2011 09:31 AM|
I have got a Union 36, from 1977.
The decks do leak. I just live with it.
The chainplates leak also. I plan to catch the water drips and duct them to the bilge (next project).
The tanks were poor, particularly the water tank that was stainless but welded with wire rods (so it leaked like a sieve). That one really stung me.
The stern tube leaked horribly.
I fixed all that.
It is still a good ship, and good in a big sea.
And undeniably pretty.
And I am keeping it, now 19 years on.
And yes, perhaps the Cape George 36 is a better constructed ship. It looks better constructed. Here is one....
....but it is two years older than my Union Polaris 36.
And three times the price.
|04-06-2011 04:25 PM|
A couple of years back the Wombet and I very nearly bought a Passport 42 (Stan Huntingford not Bob Perry). Deck was pretty much shot, black iron fuel tanks were rotten, holding tank also gone to god. One bulkhead had a rotten base under the floorboards and the interior needed a complete re varnish. Electricals had been "improved" over the years and were now a complete mess, much of the electronic equipment was at the end of its useable life. . All in all about what you would expect for a Taiwanese / Chinese boat of that era. OK so not a Union but it was of the same vintage and origin and this was a boat built for Passport.
The Unions, for what they are , are nice boats overall but for my money given their origin and issues like decks and the rest would be best avoided unless an absolutely top notch example of the breed.
|04-06-2011 02:26 AM|
|MARC2012||WOW beautiful boats.marc|
|04-05-2011 08:34 PM|
Originally Posted by shayw View Post
Cape George 36 cutter
|01-18-2011 08:59 PM|
If you are interested in a Union still I can give you info on the one for sale in Portland, OR. We spent over 2 hours on her last summer. We've moved on since we've decided we want to sail more and work on the boat less. Good luck!
|01-06-2011 10:55 AM|
Originally Posted by gvolos View Post
|12-23-2010 10:12 AM|
Architeuthis is spot on with the decks on most U36s. These boats are now approaching 30 years of age and with screwed down teak decks youll find that the screws, especially at the butt ends of the strakes, have 'sawn' loose from the FRG, the 'thiokol caulk' under the teak will be 'shot', and the 'core' will be loaded with water. Such decks can be rebuilt but its a horrendous time consuming job and not all that inexpensive even as a DIY project. Unless such decks were constantly maintained by removing the OEM screws and replacing them with larger diameter (shoulder) screws such decks will 'usually' be sodden.
Ditto, Tayana, Baba, etc.
Also most of these boats have quite inferior 'metallurgy' and very rot/corrosion vulnerable chainplate bases. These (all) were 'high maintenance' boats and most owners 'didnt'.
|12-23-2010 06:29 AM|
Did you happen to look at the one in Indian Town Florida, or the ones in Mexico?
|02-28-2010 11:35 PM|
|Architeuthis||Do not know of any owners. I think there were two for sale in WA when I was looking. One made my short list but lost because it needed too much work.|
|This thread has more than 10 replies. Click here to review the whole thread.|