|Topic Review (Newest First)|
|05-18-2011 12:25 PM|
Originally Posted by SVEtosha View Post
I have a horizontal windlass with 1 hawse pipe appropriately positioned at the chain gypsy. This is for my main anchor which is on all chain. The 2nd hawse pipe isn't positioned for windlass use, but as it's a rope rode it doesn't matter. I also don't use it all that often.
|05-15-2011 06:58 AM|
Thanks for the very comprehensive reply, its great.
I didn't know that the chain locker was divided into 2. I assume you have a double bow roller but what about getting the chain out & in the locker?
Do you have 2 hourse pipes that are positioned to use the one windlass or does the locker have a lid that you open & feed each chain to the windlass?
It must be a very large locker to hold the quantity of chain & rope that you carry, are they both the same size or one bigger than the other?
|05-08-2011 07:58 PM|
Originally Posted by SVEtosha View Post
I have a total of 220 gallons of water tankage (180+40), and it wouldn't be hard to find space for more. However given the hull shape it's likely to be high up (like the v-berth tank). There might be some space to install a bladder tank.
I'm not sure how much room a watermaker realistically takes, although especially with the component models you ought to be able to fit it in somewhere.
When I repowered I replaced the batteries (6x Trojan T105) with 2x Lifeline AGM batteries, 255 Ah. These are exclusively charged from a 120a alternator.
|05-08-2011 11:14 AM|
|05-08-2011 10:17 AM|
They've owned her since '89; she was not necessarily new then. Whether marine growth is an issue will have little to do with the design and all to do with the paint used and the waters she lives in. All boats will be slowed by such growth, of course.
FWIW I believe that most owners going offshore with these boats will have taken storm protection measures for those largish portlights.
|05-08-2011 08:26 AM|
Thanks for reply. Having owned a 416 since 89 you must be very happy with her?
I would appreciate your feedback on the following if that is possible.
I like the pilothouse look but am not sure if the windows are to big. As I will be doing a lot of bluewater sailing in the south pacific & southern areas of Australia I will encounter big seas. Do you think the windows are up to it?
Where do you keep your propane tanks?
I was under the impression that Cooper sold the molds to Bayliner in 81 after a fire at the factory & from that date the Cooper 416 was made with the name US42. Is this correct or is yours a genuine Cooper 416 which goes against the reviews I have read?
Yes, some have single & others twin spreaders. Which is the same with the bbackstay. Does your 416 have a single or twin backstay?
Others have said that the tanks can split & then big problems to fix them. Have you encountered this problem & if so what was your problem & how did you fix it?
As I will be doing extended cruising, do you think your water & fuel tankage is surficient? I am thinking that more water would be good. I noticed uyou have extra water in the v-berth. Is there other areas where another water tank could be placed?
The other choice is to install a water maker. Is there room for this to be done?
The photos of your 416 show her a a very lovely yacht, congrats. I do not see any solar panels or wind genny. What & how many batteries do you have & what do you use for charging them up?
You mentioned growth on the hull. Is this due to the beam?
I am 6' 3'' tallso am wondering what sort of headroom do you have in the fwd cabin, head, saloon, galley area & the aft cabin?
Is the chain locker very big? How much chain/warp do you carry there?
Sure to have other questions but wont bother you with them all at once.
Look forward to your reply.
|05-06-2011 08:55 AM|
|svFolieADeux||Thanks! The original owner lived in the Pacific Northwest and brought the boat through the Panama Canal to Florida. We bought her in Ft. Lauderdale and sailed her up to Rhode Island. This was in 1989, and since then we've seen 1 Cooper 353 (in Cuttyhunk, MA to be specific) and that's it.|
|05-06-2011 01:32 AM|
|Faster||Your boat looks great! Must be a rarity on the East Coast...|
|05-05-2011 11:30 PM|
I've owned a Cooper 416 since 1989 and would be happy to answer your questions. To answer the original question: the hull is not completely cored, but I couldn't tell you exactly where it goes from cored to solid. The hull coring (at least in my boat) as I recall is Klegecell, while the deck and pilothouse are balsa cored. We do not have the inside steering station. The original owner (the boat is an '84) had previously owned pilothouses and in his opinion the inside steering station was useless. Due to the interior height and the placement of the forward windows you would need a fairly high interior helm seat in order to have any visibility. If I ever get a "real" autopilot, though, I'll set up a remote at what would have been the inside steering station.
Our boat performs pretty well considering its beam, although it is very sensitive to bottom growth.
As far as storage is concerned, it will depend on the boat. It seems that the factory (at least in the '84 time frame) was willing to make extensive changes to accommodate the buyer's wishes. I understand that normally the 416 had a pilot berth to port at the companionway. Instead I have a large portside cockpit locker, and then below a large hanging locker, a set of drawers roughly 20" wide from cabin sole to pilothouse windows, and then a 20" wide locker that was used for.... a clothes washer. We never used it and removed it, leaving a 36" x 30" x 18" space just waiting to be filled with something. Eating up some storage space is a 40 gallon water tank under the v-berth and a 30 gallon holding tank under the settee at the table. The main water tank and fuel tank are installed below the cabin sole against the hull.
I noticed in another thread someone mentioning that the 416 has a single spreader rig. As you can see in the photo, that's not the case on my boat.
|04-21-2011 10:18 AM|
I to am looking to purchase a Cooper 412 & would appreciate any info on them. How do they perform, what is the storage like, does the internal steering position get used or it a waste of space etc.
Also if someone has one for sale I would be interested in hearing from them.
|This thread has more than 10 replies. Click here to review the whole thread.|