Need to replace my 1974 Tartan 30 C tiller that is delaminating.
From Tartan 30 pictures I have seen it appears that the tiller on my boat is not original .Looking at the tiller types below, I have type E on my boat but I think that it should be type F/G ?
If anyone has an original oem tiller could they please measure it and post the dimensions . ( I can get by without the butt measurements if that is difficult with the tiler still on the boat)
Please measure : butt width and height ; rise, and length.
The length is "as the crow flies" ie. not along the tiller but a straight line
(similar to the straight line in the diagram below but the measurement stops at the butt and not extending past it )