|Topic Review (Newest First)|
|08-28-2006 08:37 AM|
|sailingfool||All things Rhodes 19 related start and end at www.rhodes19.org.|
|08-28-2006 08:13 AM|
|sailingdog||I'd check with a Rhodes 19 user group. They'll have much more knowledge that is specific to the boat, especially about repairs, and sources for parts.|
|08-28-2006 08:04 AM|
Rhodes 19 underdeck Cockpit issues
I have a 1966 Rhodes 19 with rotted wood that surrounds the cockpit under the deck. This wood is used to mount the 3 pieces of brightwork (port, starboard and aft) and seats in a channel of fiberglass.
After removing all 20-28 pieces, I was able to salvage some good ones and they are 5-6 inches long, 1 inch wide and cut on bias.
I could try to make these myself, but I was wondering if they could be sourced somewhere, what the best wood to use would be and what would be the best install method.
Final question: Do templates exist for the Rhodes 19 underdeck plywood brackets that mount on the hull and under the deck?
Thanks in advance for any help!