|Topic Review (Newest First)|
|11-16-2001 01:49 PM|
Removed Treadmaster from our 35foot sail boat. She is aluminum but we tried just about all chemicals that you could buy including acetone, MEK etc. No luck. Ended up using a Matabo grinder and 36 grit disk. May be alittle harsh if your hull is fiberglas. Good luck.
|11-02-2001 11:05 AM|
I''m looking for suggestions as to the best way to remove old Treadmaster from my deck, especially with regard to the residual glue/gunk underneath it. I''m thinking heat gun, but maybe someone has a better idea. Thanks, Joseph