Soutie, I'll second ArmorAll. It keeps gaskets and seals flexible for years. It won't renew them overnight...but it will help them without rotting them. (Some of the things that "soften" gaskets just rot them.)
On the downside, ArmorAll can eventually also soften adhesives and cause paints to lift from plastics as well.
10-06-2006 10:30 AM
Brake fluid will sofen the seal but I dont know what the reaction with the lid.
10-06-2006 07:34 AM
Might also be worth trying something like ArmorAll.
10-06-2006 04:34 AM
Sailningdog Yes that's one of my fallbacks. Alternatively to get them directly from the UK over the Internet and courier.
True Blue: The Zenith (whihch I have) is also around $23:00 direct from the supplier plus courier costs. This is probably the way to go. In the mean time I'll try something neutral like a non petroleum based 'oil' and see if it makes any impression. Thanks to all for the time.
10-04-2006 09:52 AM
Is it possible for you to buy direct from Defender? Assuming you have the Blake Lavac "Popular" model (better and heavier than the newer Zenith model), the seal is only $23.00 US.
Here's a link to the web page with "Service " kits for Blakes:
Why don't you get someone in the US or Europe to buy them for you and ship them to you.
10-04-2006 08:49 AM
I know one should not convert one for one but I am paying in South African Rands and the dealer is quoting the equivalent of around $250 (each) for the seals.
By the way I have already made a repair to a cracked lid (used Pratley two part epoxy putty) a few years ago. You can imagine how much a lid would cost in my part of the world.
10-03-2006 08:15 PM
Especially, since the only source for them in the USA is Defender Marine out of Connecticut.
10-03-2006 07:51 PM
I recently just paid an absurdly ridiculous amount of money just for the lid on one of our two Lavac heads, reusing the old seal since it was in good shape. I had to bite the bullet with a $150.00 charge for a round piece of plastic. I remember the lid gasket (seal), to cost about $30.00, plus shipping.
Lavac toilets are incredible, but on the very rare occasion you may need parts, the Brits have us by the nads.
10-03-2006 10:39 AM
Mmmm difficult to say. There is nothing in the parts manual. At this stage they feel pretty much like slightly stiff PVC (white).
This thread has more than 10 replies.
Click here to review the whole thread.