when i got my boat the swing keel had a piece of line on the winch to pull the keel up . i plan on replacing it with stainless steel wire .
how are you all attaching it to the swing keel have not gotten a look at the swing keel from the bottom yet
12-05-2011 06:21 PM
I replaced mine with a braking winch from Northern Tool, it will hold a position when released and I think it might be easier on the swing keel if you happen to let go of it
12-05-2011 05:43 PM
replacing swing keel winch
one side of my winch the flange was completely missing . went to several places trying to find a winch not made in china . no such luck did find a attwood 1200 lb trailer winch with a nylon strap at chinamart .
take out two bolts and the nylon strap slips right off the flange on the drum . everything looks like it will line up fine just have to drill one new mounting hole.